![]()
This makes a large difference in the ability to cut.įor 2) this is a more complex issue to align the machine, however once you know what you are doing it takes only around 10-15 minutes. The lens orientation should be convex side facing upwards, you will be able to see your reflection in it & concave side facing downwards, you cannot see your reflection in it. ![]() Just unscrew the lens base & flip the lens over, making sure that it is clean/no fingerprints or oils before replacing. Alignment of the machine mirrors is not quite rightįor 1) this is a simple fix.Lens is in upside-down (mine came shipped upside-down).There’s 2 things that come to mind that could be causing your issues with not being able to cut 3mm mdf. So would need to create some ear attachments that hook onto the little bits coming off the Hi Helce. One thing I’d note is because I chose to radially slice the model, the ears kind of disappeared. Used 11 pieces of 300mm x 200mm ply to complete this. There is a lot of material wastage in this, as I hollowed the model. This just gave a light burn into the top to show which piece connects to which other piece at which spot. So, firstly I marked the images (with all the numbers) by using cut 10mA 50mm/s. ![]() Autodeask 123d models full#More slices on the vertical would give a much nicer & more full 3d shape, but would also use more material (which I ran out of until I go hardware store again). This was actually just tied with pieces of string as I put it together, to stop the pieces falling out as I added extra pieces. Either way, would glue the piece anyway, so doesn’t really matter. Used a basic downloaded model of a human head, hollowed it out, radial slices (4 horizontal, 20 vertical) originating from the centre of the model.Ĭut it out of 3mm ply, which turns out is not quite 3mm (I think more like 2.7mm) as things are loose in the 3mm slots (unless it’s kerf width issue). Autodeask 123d models upgrade#
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |